

AFI-P-HD AmpliFi High Density Home Mesh Point
![]() |
From AMPLIFI
Availability: Item is currently available.
3,054 Points
See more in Electronics
See more in Accessories
See more in Computers
Product Description
Extend the reach of your AmpliFi mesh network with the AFI-P-HD AmpliFi High Density Home Mesh Point from Ubiquiti Networks. This antenna features dedicated signal LEDs that indicate signal strength in relation to the base unit and a magnetic connector from which the top portion of the antenna can be adjusted for optimal signal reception. This AmpliFi extender operates on the 2.4 GHz band supporting data rates of up to 450 Mbps and the 5 GHz band supporting data rates of up to 1300 Mbps, and comes compatible with 802.11a/b/g/n/ac Wi-Fi standards. In addition to enhanced Wi-Fi data rates, the AFI-P-HD supports 3x3 MIMO technology along with a maximum transmit power of up to 26 dBm.
Connectivity | |
Wi-Fi | Wi-Fi 5 (802.11ac) |
Ports | |
Number of Antennas | 1 x Internal |
MU-MIMO Support | 3 x 3 |
Beamforming Support | No |
Wireless Security | WPA-PSK, WPA2, WPA2-PSK, AES, TKIP |
Bluetooth | 4.0 LE |
Communication Protocol | |
Virtual Assistant Support | |
General | |
Throughput | 2.4 GHz: 450 Mb/s 5 GHz: 1300 Mb/s |
Transmit Power | 26 dBm |
Antenna Gain | |
Guest Network Support | |
Max SSIDs Supported | |
Mobile Operating System Support | |
Operation Modes | |
Supported IEEE Standards | |
Supported Protocols | |
Processor | |
Memory | |
Flash Memory | |
Speakers | |
Built-In Microphones | |
Display | |
Electrical | |
AC Input Power | |
DC Input Power | 9 VDC at 1.5 A |
Power Consumption | 11 W |
Environmental | |
Operating Temperature | 14 to 131°F / -10 to 55°C |
Operating Humidity | 5 to 95% |
Storage Temperature | |
Storage Humidity | |
Physical | |
Certifications | CE, FCC, IC, as per Manufacturer |
IP Rating | |
Material of Construction | Plastic |
Dimensions | 1.6 x 3.0 x 1.0" / 42.0 x 76.7 x 26.5 mm |
Weight | 3.7 oz / 105 g |